In this post, we will cross-compile a small baremetal program for ARM processor on an Ubuntu machine.

ARM cross-compile toolchain

First step is to install the ARM cross-compiler toolchain. Luckily Ubuntu already has it in its software repository. Execute the following command in the terminal to install ARM EABI compatible tool chain:

sudo apt install gcc-arm-none-eabi

Check the version of the installed compiler using the following command:

arm-none-eabi-gcc --version

Sample baremetal program

Now, we need a sample baremetal program to compile. I have choosen a very simple assembly program.


.global _start
  B _reset /* Reset */
  B . /* Undefined */
  B . /* SWI */
  B . /* Prefetch Abort */
  B . /* Data Abort */
  B . /* reserved */
  B . /* IRQ */
  B . /* FIQ */

  mov r1, #10
  ldr r0, =0x20000000
  str r1, [r0]
  ldr r2, [r0]
  B .


Lets assemble the assembly file using GCC assembler.

arm-none-eabi-as -mcpu=cortex-m3 -g startup.S -o startup.out


Finally lets link the object file startup.out generated by the assembler.

arm-none-eabi-ld -Ttext=0x0 -o startup.elf startup.out

Note: Since the program is very simple, I haven’t used any linker script here.

-Ttext=0x0 option instructs the linker to use 0x0 as the starting address of the instructions.